Mesh/inch Wire dia Aperture Open area % Weight (lb) per 100 square foot Inch Mm Inch Mm 1 x 1 .080 2.03 .920 23.37 84.6 41.1 2 x 2 .063 1.60 .437 11.10 76.4 51.2 3 x 3 .054…
Monthly Archives: September 2014
Plain Weave/ Twill Weave – technical specification
Tagged with: plain weave, twill weave
Posted in Plain Dutch Weave Ni80Cr20 Nichrome Mesh, Plain Dutch weave wire mes, Plain weave fine Mesh, twill weave
Posted in Plain Dutch Weave Ni80Cr20 Nichrome Mesh, Plain Dutch weave wire mes, Plain weave fine Mesh, twill weave
Embedded lamination of thin film Nichrome resistors
The embed lamination procedure induces the high stress on the resistor and produces the high tolerance alteration. The embed lamination increases tolerance above 1%. The variation changes while the first lamination process may be caused by the surface stain or…
Nichrome alloy PCB Process and prolong simulation
The tests conducted to simulate influences of PCB process and prolong functionality were Humidity test including 40oC, 95% humidity for 240 hours. Second step includes solder reflow: conducted per EIA/JECDEC 22-A112-A with preconditioning at 30oC, 60% RH for 192 hours…
Tagged with: Humidity, Nichrome alloy, nickel-chromium alloy, resistor, resistors, Stress test
Posted in nichrome heat resistance wire, Nichrome heating wire, Nichrome Ni80Cr20 heating coil
Posted in nichrome heat resistance wire, Nichrome heating wire, Nichrome Ni80Cr20 heating coil
Metals, Alloys-Information Guide 