Monthly Archives: November 2013

Resistance to localized corrosion by Inconel 625

The below table shows the high temperature tensile strength for the annealed and aged resistance to corrosion Inconel 625: Temperature Yield Strength Tensile Strength Elongation Reduced Area oF oC Ksi MPa Ksi Mpa % % 75 23 129.4 892 181.9

Tagged with: ,
Posted in Inconel 625 alloy plate, Inconel 625 Wire, resistance to corrosion Inconel 625 plate, Resistance to corrosion Inconel 625 Rod

Inconel 725 Rod for Stress Corrosion Cracking

The Resistance to corrosion Inconel 725 is basically a combination of Nickel – Chromium – Niobium that is extremely age hardenable an offers superior resistance to corrosion. It offers necessary corrosion resistance similar to Inconel 625 that is utilized in

Tagged with: , ,
Posted in Inconel 725 wire

Nichrome Resistance Alloys for Wear Resistance

The Nichrome resistance Cr30/Ni70 fits best to the operations that are subjected to the oxidation. In the operations that are performed in the presence of fuel ashes, alkali metals and sulphates, nichrome resistance Cr20/Ni80 with high chromium content I not recommended

Tagged with: , , ,
Posted in Nichrome Resistance Cr20/Ni80 Rod

Nichrome Resistance Cr20/Ni80 Rod for heating appliances

The nichrome resistance Cr20/Ni80 describes that the chromium dissolves completely in the nickel. The solubility reaches maximum 47% at the eutectic temperature and reduces to 30% at the room temperature. The array of industrial Nichrome resistance alloy is based on the

Tagged with: ,
Posted in Nichrome Resistance Cr20/Ni80 Rod

Various applications of Copper-Nickel Cu90/Ni10 Tubing

The Copper-Nickel Cu90/Ni10 tubing and sheet are utilized on the commercial scale in the power station and heat exchanging systems. The extruded bar and forged parts are combined with the casting are excellent choice for the cryogenic vessels and superheaters

Tagged with:
Posted in Copper-Nickel Cu90/Ni10 tubing

Stable Thermoelastic coefficient of Nickel Ferrous Alloy Tubing

There are several metals and alloys that show negative temperature coefficient of modulus of elasticity and become stiff upon heating. The alloys show positive coefficient of thermal expansion, length enlargement on heating. This occurs with an increase in energy of

Tagged with:
Posted in Ni-Span C902 alloy tubing

Soldering and outer layer of Copper-Nickel Cu70Ni30 plate

The Copper-Nickel Cu70Ni30 plate is commonly prone to temperature thus it inclines to the production of tension chinks in the warmed regions of the multiple run welds. This can be overwhelmed by coating the outer layer the junctions with buffer

Tagged with: , ,
Posted in Copper-Nickel Cu70/Ni 30 plate

Welding fusion of Cu70/Ni30 alloy

Generally, the tough metals are recommended for tooling for Cu70/Ni30 alloy having extended service life as compare to the high speed steels and the risk that jammed chips will rashly damage the cutting edge. The medium feeds and cutting speed

Tagged with:
Posted in Copper-Nickel Cu70/Ni30 tubing, Cu70/Ni30 alloy tubing

Absorption of Gas by Cu70/Ni30 alloy

The Cu-Ni alloy comprises of manganese are utilized for electrical resistors is rarely corroded by the dilute acids, more powerfully by the acid vapors certainly in the hydrochloric acid. These offer spectacular resistance to corrosion by ammonia. Moreover resistance is

Tagged with: ,
Posted in Copper-Nickel Cu70/Ni30 tubing, Cu70/Ni30 alloy tubing

Age Hardening Copper Nickel Cu-Ni alloy sheet

The mechanical properties of Copper Nickel Cu-Ni alloy sheet comprising of 20% nickel at the nominal temperatures and cross section is 16 x 14.8mm. Symbol Form supplied Supplement Tensile strength Rm N/mm2 0.2% Proof stress N/mm2 Elongat. A % hard.

Tagged with: ,
Posted in 90/10 Copper Nickel Plate, 90/10 Copper Nickel Tape, copper nickel Cu70/Ni30 welding wire, Copper Nickel Cu90/Ni10 Ribbon, Copper Nickel Cu90/Ni10 Sheet, Copper Nickel Cu90/Ni10 wire, copper nickel welding wire, Copper-Nickel Cu90/Ni10 welding wire, Cu-Ni sheet, Cu-Ni strip
Metals, Alloys-Information Guide

Super metals and alloys