As we know the inconel 600 offers broad strength and toughness on base of its production conditions. The wire’s mechanical properties are shown in the below table:
Form and Condition | Tensile
Strength, ksi |
Yield Strength, ksi | Elongation, % | Hardness, Rockwell |
Wire | ||||
Cold-Drawn | ||||
Annealed | 80-120 | 35-75 | 45-20 | – |
No. 1 Temper | 105-135 | 70-105 | 35-15 | – |
Spring Temper | 170-220 | 150-210 | 5-2 | – |
The wire exhibits intermediate yield strength of 25,000 to 50,000 ksi and it is paired with the elongation about 55 to 35% provides fabrication with minor issues. In the severe cold processing, it offers large tensile strength about 220,000 psi. The evaluation of total hemispherical emissivity and total normal emissivity are provided as following:
600 oF | 900 oF | 1200 oF | 1500 oF | 1800oF | 2000oF | |
Total Hemispherical Emissivity | 0.69 | 0.72 | 0.76 | 0.79 | 0.82 | – |
Total Normal Emissivity As-Rolled and Oxidized | – | 0.85 | 0.87 | 0.90 | 0.95 | 0.98 |
Sand-Blasted and Oxidized | – | 0.86 | 0.90 | 0.93 | 0.96 | 0.97 |
The below table represents the tensile properties of inconel 600 at room temperature in the hot annealed condition at the variable temperature. The tensile properties of alloy in the forged to 31% reduction at the temperature of 1600oF
870oC are provided for forging and subsequently to the annealing processing is provided in the below table:
Heat Treatment
B °F/1 hr |
Tensile
Strength, ksi |
Yield Strength, ksi | Elongation,% | Hardness, Rb |
1300 | 100.5 | 61.0 | 34 | 92 |
1400 | 97.5 | 57.0 | 31 | 89 |
1500 | 98.5 | 57.0 | 33 | 91 |
1600 | 102.0 | 62.0 | 32 | 93 |
1700 | 102.5 | 41.5 | 30 | 88 |
The above table describes the influence of annealing on the features of cold processed alloy. The tensile strength characteristics of cold treated tubing of alloy in the drawn and annealing conditions are provided as following:
Heat Treatment
B °F/1 hr |
Tensile
Strength, ksi |
Yield Strength, ksi | Elongation,% | Hardness, Rb |
1200 | 143.5 | 124.0 | 17.5 | 32 |
1300 | 131.5 | 108.2 | 18.0 | 30 |
1400 | 103.0 | 41.5 | 41.0 | 88 |
1500 | 100.3 | 39.7 | 42.0 | 83 |
1600 | 100.5 | 40.5 | 43.0 | 83 |
The inconel 600 wire introduces excellent impact strength even at the normal room temperatures and sustains its whole strength at the lower value of temperatures. the wire doesn’t allow the hard to brittle conversion of material with the reducing temperature. The impact strength for 0.5 inch thicker plate at the room and lower temperature limits are shown in the below table:
Orientation | Temperature | Impact Strength J | |
oF | oC | ||
Transverse | 70 | 21 | 86.1 |
-110 | -79 | 88.8 | |
-320 | -196 | 82.4 | |
Longitudinal | 70 | 21 | 83.7 |
-110 | -79 | 90.8 | |
-320 | -196 | 83.1 |
Moreover the impact strength of inconel alloy in other forms at room temperature is provided in the below table:
Condition | Impact Strength | |
Izod Notch, J | Charpy U-Notch, J | |
Cold-Drawn | >163 | 312 |
Cold-Drawn, Annealed | 95-136 | 205 |
Hot-Rolled | >163 | 312 |
Hot-Rolled, Annealed | 136-163 | – |
The impact strength of inconel 600 at the high temperature is given below:
Temperature | Impact Strength
|
||
oF | oC | Annealed,J | Cold-Drawn, J |
70 | 21 | 244 | 155 |
800 | 430 | 254 | 114 |
1000 | 540 | 217 | 116 |
1200 | 650 | 217 | 141 |
Very Useful Information About Inconel 600 Mechanical Properties One of the Useful Blog To Visit Thanks For Sharing